Sort
View
Out of stock  - Insize Digital Calipper 150 Mm (1112-150)
Out of stock  - Digital Calipper Plastic 75 Mm
Out of stock PRESIDIUM - Presidium Gem Computer Gauge
Out of stock  - Dial Gauge 1/10 Mm
Out of stock  - Digital Gauge 1/10 Mm
Total of 18 products are displayed.

Digital | Manual | Dial Caliper Types and Prices

Alexmachine.com has the most affordable digital manual dial calipers. We provide you the option to buy some of the best and most precisecaliper types available at reasonable prices.

What is Digital Caliper?

It is a high-precision tool that is used to make extremely accurate measurements with high precision. Using the caliper is simple because it has a digital display. The majority of them are capable of measuring down to 0.01 mm (0.0005 inches).

How to use the Digital Caliper?

Every workshop should have at least one set of digital calipers at the ready. Everyone, regardless of their size, will need to acquire the tools they need to make their own creations. Calipers are tools used to measure the distance between two points on a surface that is on opposite sides of a given object.

To use it correctly, follow these steps:

1.Open the jaws of the caliper.

2.Slide the caliper over the piece of work you're trying to get an accurate reading on.

3.The caliper jaws should be closed with the knob turned until they make initial contact with the object to be measured. Use caution when tightening the knob.

4.Caliper pads should be able to slide across the piece with a light amount of force.

5.Take a look at the digital display.

Calibration and proper use of a digital caliper are necessary for accurate readings.

Outer Measure

Large jaws on your digital calipers take outer measurements of an object. To check your wood-turning measurements, you can use this as a workpiece, dowel rod, wood piece, or machining part. First and foremost, make sure the calipers are closed. To re-calibrate the calipers, press the zero button. Then, open the calipers and clamp the object to be measured. Slowly tighten the caliper's thumbscrew on both jaws until they are firmly closed. Check the readings.

Inner Measure

The smaller jaws of your digital calipers are used to measure the inner measurements of a product. Washer hole diameter, radiator fin spacing, and keyboard spacing are all examples of inside dimensions. Measure the inside diameter of your calipers by closing them tightly. The calipers must be re-calibrated before each new measurement. Using this method ensures that the measurement is precise. Put the small jaws of the digital calipers into the hole and tighten them. To use the calipers, slowly open them until both jaws are firmly on the object being measured. Decide on a measurement by examining the digital display's data.

Depth Measure

A depth measure also referred to as a "depth probe," can be found on nearly every digital caliper. It is possible to use this probe to determine the exact depth of a cut or hole in an object. Pressing the zero button will calibrate your digital calipers so that you can measure the depth of an object with them closed. Use the thumbscrew to lower the probe of the calipers into the object until it makes contact with the bottom of the recess. Read the screen measurement.

Pedometer

It is a pedometer that counts how many actions a person takes based on the movement of their body. Pedometers can be purchased online at the most competitive prices at Alex Machine.

How to Calibrate Digital Caliper?

Calibration is essential. We're all aware of it. However, knowing when to get calibration can be challenging at times. Have you just bought a digital caliper and are unsure of its accuracy? Working on jewelry making requires a highly accurate digital caliper. Calibration of digital calipers ensures accuracy. Calibration is a simple process. Here, we'll go over how to properly setup a digital caliper

1.Clean contact surfaces are essential when measuring or calibrating this precisely. Wipe the contact pads with a clean, lint-free cloth.

2.Start the Calibration Slide

3.The Caliper should be slid closed. 

4.Press the Fixed Pad firmly against the Moving Pad until the Set Indicator reads "Zero."

5.Check the calibration of the digital caliper.

Caliper Prices

What is the cost of caliper types?As a customer, you will likely be able to choose a high-quality product that meets your requirements while remaining within your budget. This is feasible if you have the expert guidance and the right place to buy.

For further pricing details, please visit our online store. Alex has all kinds of caliper pricesyou require. We have whatever you're looking for.

Digital Caliper Modals

Check out our great selection of digital caliper modals

  • Asimeto Digital Calipper 150 Mm
  • Insize Digital Calipper 75 Mm (1111-75A)
  • Insize Digital Calipper 100 Mm (1111-100A)
  • Insize Digital Calipper 150 Mm (1112-150)
  • nsize Plastic Digital Calipper 150 Mm
  • Insize Dial Calipper (1312-150A)
  • Vernier Calipper 100 Mm
  • Vernier Calipper 150 Mm
  • Dial Calipper 150 Mm
  • Digital Calipper Plastic 75 Mm
  • Digital Kumpas Plastic 100 Mm
  • Digital Calipper Plastic 150 Mm
  • Digital Kumpas Metal Case 150 Mm
  • Presidium Dial Gauge
  • Presidium Electronic Gemstone Gauge
  • Presidium Gem Computer Gauge
  • Dial Gauge 1/10 Mm
  • Digital Gauge 1/10 Mm
  • Spring Caliper 1/10 Mm

Insize Digital Caliper

A good value for the money, Insize Digital Calipersis a good choice. In my ten years of experience in machine and layout, I have always used brown &Sharpe calipers, which are undoubtedly the gold standard in precision and accuracy.

Manual Caliper

To measure internal and external distances with great accuracy, a digital manual caliper, a highly precise instrument, can be employed. It's up to the user to interpret the scale's readings.

Dial Caliper

Dial calipers can be used to read a workpiece or tool in fractions of a millimeter or an inch. These calipers have adjustable jaws that move across a rail, allowing you to accurately measure both the inside and outside measurements of your task (A caliper with upper jaws is required for internal measurements).

 

Prepared by  T-Soft E-Commerce.